2024年7月2日发(作者：安装空调的视频)
万能胶水制作车间工艺流程
1.配料准备：准备所需的原材料和配方。
Preparation of ingredients: Prepare the required raw
materials and formulas.
2.材料称量：按照配方比例，精确称量各种原材料。
Material weighing: Accurately weigh various raw materials
according to the formula ratio.
3.搅拌混合：将各种原材料放入搅拌设备中进行混合搅拌。
Mixing: Put various raw materials into the mixing
equipment for mixing.
4.加热溶解：将混合好的物料加热溶解，使其达到需要的流动状
态。
Heating and dissolving: Heat and dissolve the mixed
materials to achieve the required flow state.
5.过滤除杂：对溶解后的物料进行过滤，去除杂质。
Filtration and impurity removal: Filter the dissolved
materials to remove impurities.
6.消泡脱气：采用真空设备对物料进行脱气处理，去除气泡。
Defoaming and deaeration: Use vacuum equipment to
deaerate the materials to remove bubbles.
7.包装灌装：将脱气后的物料进行包装灌装。
Packaging and filling: Package and fill the deaerated
materials.
8.质检验收：对包装好的产品进行质量检验和验收。
Quality inspection and acceptance: Inspect and accept the
packaged products for quality.
9.成品入库：合格的产品经过检验后，进行入库存放。
Finished product storage: Qualified products are stored
after inspection.
10.清洁消毒：清洁车间设备，进行消毒处理。
Cleaning and disinfection: Clean workshop equipment and
disinfect.
11.开机检查：开机前对设备进行检查，确保正常运转。
Startup inspection: Check the equipment before startup to
ensure normal operation.
12.设备维护：定期对生产设备进行维护保养，确保工作稳定。
Equipment maintenance: Regularly maintain production
equipment to ensure stable operation.
13.人员培训：对生产工人进行相关技术和操作培训。
Personnel training: Provide relevant technical and
operational training to production workers.
14.安全防护：严格遵守安全操作规程，做好安全防护工作。
Safety protection: Strictly follow safety operating
procedures and do a good job in safety protection.
15.废料处理：对生产过程中产生的废料进行妥善处理。
Waste disposal: Properly handle the waste generated
during the production process.
发布评论